Table of Contents
Are you looking for an energy-efficient unit that heats and cools each square foot of your space, reducing energy bills at the same time? A heat pump might be a reasonable solution to this heating puzzle.
Let’s discover the average heat pump installation cost and how this system can benefit you.
Benefits of Heat Pump Installation
Even though the cost of a heat pump installation is quite high, it is worth every dollar spent. You can see for yourself in the following list of heat pump installation benefits.
- Energy Efficiency. Heat pumps produce 1,5 to 3 times more heat rather than the source energy they consume while operating. It can save you up to 50% on energy bills.
- Dual Functions. The unit can both heat and cool your apartment. It extracts heat from the outside air even in cold weather and brings it inside for heating during winter. In the summer, it can remove heat from indoor air and expel it outside for cooling.
- Environmental Friendliness. As heat pumps rely on the heat transfer process, they do not burn fossil fuels directly. These units can significantly reduce carbon emissions and harmful impacts on the environment.
- Zoning Capabilities. Many heat pump systems allow for zoning, meaning you can control the temperature in different areas of your home independently. This can lead to additional energy savings and increased comfort by only heating or cooling the areas that are in use.
- Incentives and Rebates. In some regions, governments and organizations may offer incentives, rebates, or tax credits to encourage installing energy-efficient heat pump systems. They can help offset the initial installation costs.
Read our previous article to find out how to save up to $10,000 with the Home Efficiency Rebate Plus (HER+) program.
Heat pumps have a lot of benefits that can result in greater savings than you spend on upfront installation costs.
What the Heat Pump Installation Price Depends On
When our clients ask how much is a heat pump installed, we may give only very general figures. At HVAC Service Solution, we know that each case is different, and the price can change accordingly. The average price varies between $3,000–$15,000+, but it usually depends on the following factors.
- Type. There are different types of heat pumps, including ducted air-source heat pumps, ground-source (geothermal) heat pumps, and water-source heat pumps. Ground-source heat pumps tend to be more expensive to install due to the additional requirements for drilling and installing ground loops.
Find out more about different types of heat pumps and how they work in our article via the link https://thehvacservice.ca/
- Size. This parameter depends on your heating and cooling needs. Expect to pay $4,000–$6,500 for 1.5 Tons and $8,000–$12,000 for 5 Tons in a case with mild-weather units.
- Efficiency. Heat pumps with higher energy efficiency ratings tend to be more expensive. The prices start from $950–$1,300 for units with 14 SEER and lead up to $3,950–$4,300 for units with 20 SEER.
- Brand. High-quality heat pumps from reputable brands often come with better warranties and may have higher upfront costs. However, the reliability and extended warranty coverage can provide peace of mind in the long run.
- Labor. Labor charges for the installation can vary based on the complexity of the installation, local labor rates, and the experience of the HVAC contractor.
If you want to receive a detailed price list for your case, considering all the special features of your building, contact us anytime via the link below.
Average Heat Pump Installation Costs in Canada
The price range for heat pumps is quite broad, starting from $3,000 and leading to more than $15,000+. It is the average heat pump installation cost in Canada. The main factor that specifies the price is the type of the system: ductless mini-split, air-source, ground-source (geothermal), and water-source. Let’s compare them in detail below.
How Much Does It Cost to Install a Ductless Mini-Split Heat Pump
A ductless mini-split heat pump consists of an outdoor unit and one or more indoor units connected by refrigerant lines. They can be placed in different rooms, offering zoned heating and cooling capabilities.
Ductless mini-split heat pumps are an ideal solution for homes without existing ductwork, small apartments, or rooms with inconsistent heating and cooling needs, delivering cost-effective and personalized comfort throughout the year.
The ductless mini-split heat pump installation costs start from $4,000 up to $15,000 for larger units, cold weather models, multiple interior zones, more complex installations, etc.
Cost of Air-Source Heat Pump Installation
An air-source heat pump works by transferring heat between the indoor and outdoor air. During winter, it extracts heat from the outside and brings it inside to warm your home, even in cold weather. In the summer, it reverses the process, removing heat from indoor air and expelling it outside to cool your home.
Canadian government states that heat pumps of this type are the most common to install. There are already 700,000 units across the country.
The average cost of ducted air source heat pump installation is $10,000–$20,000, but the final price may be higher or lower depending on the model, system size, and special features of your home.
Ground-Source Heat Pump: Cost of Installation
A ground-source heat pump, also known as a geothermal heat pump, uses the constant temperature of the earth as a heat source in winter and a heat sink in summer. The system consists of an underground loop buried in the ground and a heat pump unit installed indoors.
During winter, the heat pump extracts heat from the ground and transfers it inside to warm your home. In the summer, it removes heat from indoor air and releases it into the ground to cool your home.
The ground-source heat pumps are the most energy-efficient and can reduce your energy bills by 65%. The average cost of ground-source or geothermal heat pump installation varies between $15,000–$40,000+.
How Much Is a Pool Heat Pump Installed
A pool heat pump works by extracting heat from the surrounding air and transferring it to the pool water. It consists of a compressor, evaporator, condenser, and a fan. The warm air is drawn in by the fan and passes over the evaporator coil, where the refrigerant absorbs the heat. The heated refrigerant then goes through the compressor, increasing its temperature, and releases the heat into the pool water through the condenser. As a result, the pool water gets comfortably warm, allowing you to enjoy your pool for a longer swimming season, even during cooler months.
Pool heat pump installation cost varies between $4,000–$6,500+.
Type of Heat Pump
Average Prices with Installation
Ductless mini-split heat pump
Air-source heat pump
Ground-source heat pump (geothermal)
Pool heat pump
All heat pumps are an energy-efficient heating choice. The HVAC Service Solution team can find you the best option to meet your needs and budget.
Schedule a free consultation via the link below to know what is the cost of a heat pump and installation in your particular case.
Tips for Heat Pump Maintenance After Installation
Professional installation ensures 70% of system efficiency. If you want to keep these numbers high and make the unit serve nearly 15–20 years, make sure to provide regular maintenance. Our team gathered basic tips to follow to make your heat pump work as a new one.
- Filters. Clean or replace the filters every 1 to 3 months, depending on the manufacturer’s recommendations. Clogged filters can reduce airflow and decrease the heat pump’s efficiency.
- Coils. Inspect the indoor and outdoor coils for dirt, dust, or debris buildup. Clean the duct coils as needed to maintain efficient heat transfer.
- Thermostat. Set the thermostat above 18 °C during heating and above 21 °C during cooling seasons. It will lower your utility costs and reduce usage.
- Professional Maintenance. Schedule professional maintenance annually. The best time is the fall before winter and early spring before the AC season.
Follow these recommendations to prolong system efficiency and lifespan.
Heat pumps will be a leading trend in the nearest future to provide energy-efficient heating and zero harmful emissions. Even though upfront costs are quite high, starting from $4,000 and leading to more than $40,000+, these units will save you more in the long-term run.
If you are searching for energy efficiency, long-term savings, consistent comfort, and environmental benefits, contact us 24/7 to find the best heat pumps for your place.
Whether it is air-to-water heat pump installation cost or air-to-air heat pump installation cost, the prices vary between $4,000–$40,000+.
The cost of a heat pump installation in Canada depends on the type of system, size, efficiency, brand, labor costs, and special features of your house.
In general, clean your filters and coils regularly, set the thermostat above 18 °C, schedule annual professional maintenance, and follow all specific recommendations from your technician to make your system work long and efficiently.